Transmitter Functions; Standard Configuration - DEI 7000 ESP Owner's Manual

Transmitter Functions

The receiver uses a computer-based Learn Routine to learn the
transmitter buttons. This makes it possible to assign any button on
the remote transmitter to any receiver function. Two possible
transmitter configurations are described in this section. Remember
that there are many alternate custom configurations that can be
programmed by your dealer.

Standard Configuration

The standard configuration is how the transmitters come programmed
initially. If you would like a custom configuration, contact an
authorized dealer.
Button I
The arm, disarm, and panic functions are usually controlled by
pressing .
Button II
Silent Mode ™ , Remote Valet
equipped) functions are usually controlled by
and Remote Valet work by pressing
Trunk release requires you to press and hold
Button III
An optional auxiliary convenience or expansion function that you
may have added to your system can be activated by pressing
This auxiliary output controls _____________________________.
2001 Directed Electronics, Inc.
©
® , and optional trunk release (if
for less than one second.
for 1.5 seconds.)
. (Silent Mode
.
5