Transmitter Functions; Using Your System; Arming - DEI 725T Owner's Manual

Dei hornet 725t car alarms: owners guide

Table of Contents

Transmitter Functions

Button I

The arm, disarm and panic functions, are usually controlled by

Button II

Silent Mode

™

and an optional auxiliary function, such as trunk

release, are usually controlled by

ing

for less than one second before arming or disarming.

Trunk release requires you to press

You can turn on, or arm, the system by pressing

mitter for one second. When the system arms, you will hear a short

siren sound, or chirp, and see the parking lights flash once. If the

vehicle's power door locks are controlled by the system, the doors

will lock. While the system is armed, the status LED will flash

approximately twice per second, indicating that the system is

actively protecting the vehicle. If you hear a second chirp after

arming and see the status LED flashes in groups, refer to the

Diagnostics section of this manual. This extra chirp is called

Bypass Notification.

2002 Directed Electronics, Inc.

. Silent Mode works by press-

for 1.5 seconds.

of your trans-

Table of Contents