Table Of Zones - Directed Electronics Matrix RS 2 Owner's Manual

(FACT) has bypassed that zone. In either case, the LED status
indicator will indicate which zone was involved (see Table of
Zones section). The security system will retain this information
in its memory and chirp four or five times each time it is dis-
armed, until the next time that the ignition is turned on.
➜

table of zones

A zone is represented by the number of LED flashes used by the
system to identify a particular type of input. Standard input
assignments are listed in the following table, along with spaces to
write in any optional sensors or switches that have been installed.
Zone - Number
of LED Flashes
1
2
3
4
5
If the Warning Zone response is triggered, the LED will not
report it.
note: Your system stores the last two triggered zones in
memory. If your system has been triggered but the LED
has been reset by turning on the ignition, your dealer can
still recall the last two zones that were triggered. Contact
your dealer for details.
© 2001 directed electronics, inc.
Description
Instant trigger - hood pinswitch
Instant trigger - a heavier impact
detected by the shock sensor
Door switch trigger
Instant trigger - for optional sensors
Ignition trigger
Dealer-Installed
Options
23