Disabling The Remote Engine Starting System; False Alarm Control Technology (Fact) - Directed Electronics Matrix RS 2 Owner's Manual

➜

disabling the remote engine starting system

This feature allows your system's remote engine starting unit to
be temporarily disabled to prevent the vehicle from being remote
started accidentally. This feature is useful if the vehicle is being
serviced or stored in an enclosed area. To disable the remote
start, move the shutdown toggle switch to the OFF position. The
switch can be installed in a location of your choice. Check with
your installer for recommended locations.
Location of Shutdown Switch____________________________
➜

false alarm control technology (FACT)

Your system has False Alarm Control Technology (FACT), a
feature designed to prevent annoying repetitive trigger sequences
due to faulty door pin switches or environmental conditions
such as thunder, jackhammers, airport noise, etc.
Example: The alarm triggers three times. Each time, the same
sensor or switch is triggering the alarm. The three triggers are
within 60 minutes of each other. FACT will interpret this
pattern of triggers as false alarms. After the third trigger, FACT
ignores, or bypasses, that sensor or switch (along with any other
sensors or switches sharing the same zone).
If the bypassed sensor tries to trigger the security system while it
is being bypassed, the 60-minute bypass period will start over.
This ensures that a sensor that is continually being triggered will
remain bypassed.
© 2001 directed electronics, inc.
19