Disarming; Siren Silencing; Disarming Without A Transmitter - Directed Electronics Matrix RS 2 Owner's Manual

relay (if installed) will not be activated. Once you have arrived at
your destination, the system will disarm when the ignition is turned
off. The siren will chirp twice and the LED will then stop flashing.
The system can also be disarmed at any time by pressing
➜

disarming

To turn off, or disarm the security system, press
hear two chirps, and the parking lights will flash twice. If the
power locks are controlled by the system, the doors will also
unlock. The siren chirping either four or five times when
disarming indicates Tamper Alert, which is described in the
Diagnostics Section of this guide.
➜

siren silencing

Your security system includes a Siren Silencing feature. After 6
seconds of trigger sequence, using the transmitter to disarm the
security system will only stop the trigger sequence (the siren will
stop and the parking lights will stop flashing). However, the
system will remain armed and the doors will stay locked. This is
extremely useful if you must stop the system from sounding, but
are unable to visually check the vehicle. This feature allows you
to silence and reset the security system when it is triggered,
without having to disarm the system.
➜

disarming without a transmitter

If your remote transmitter is lost or damaged, you can manually
© 2001 directed electronics, inc.
.
. You will
11