Directed Electronics Matrix RS 2 Owner's Manual page 19

➤ ➤
The brake pedal is pressed.
➤ ➤
The hood is opened.
➤ ➤
The shutdown toggle switch is put into the OFF position.
➤ ➤
The pre-programmed run time (12, 24, or 60 minutes)
has elapsed.
➤ ➤
is pressed during remote start operation.
To shut down the remote start and turn off the engine:
➤ ➤ Step on the brake pedal, or
➤ ➤ Press
You may want to enter the vehicle and drive it without shutting
off the motor. It is possible to shut down the remote start and
drive the vehicle without shutting down the motor.
When you are ready to drive the vehicle:
1. Disarm the security system (if
2. Enter the vehicle and turn the
3. Step on the brake pedal.
The remote engine starting system will be shut down when you
step on the brake pedal. The vehicle motor, however, will
continue to run because the ignition has been turned on. The
vehicle will now operate as usual.
16
for one second.
armed) by pressing
ignition to the ON position.
.
© 2001 directed electronics, inc.