Arming - Directed Electronics Matrix RS 2 Owner's Manual

vehicle starts when performing the Neutral Safety Shutdown
Circuit test, the remote engine starting unit has not been
properly installed. The remote engine starting module must
be removed or the installer must properly reinstall the remote
engine starting system so that the vehicle does not start in
gear. All installations must be performed by an authorized
dealer. OPERATION OF THE REMOTE ENGINE
STARTING MODULE IF THE VEHICLE STARTS IN
GEAR IS CONTRARY TO ITS INTENDED MODE OF
OPERATION. OPERATING THE REMOTE ENGINE
STARTING SYSTEM UNDER THESE CONDITIONS
MAY RESULT
PERSONAL INJURY. YOU MUST IMMEDIATELY
CEASE THE USE OF THE UNIT AND SEEK THE
ASSISTANCE OF AN AUTHORIZED DEALER TO
REPAIR OR
REMOTE ENGINE STARTING MODULE. WILL NOT
BE HELD RESPONSIBLE OR PAY FOR INSTALLA-
TION OR REINSTALLATION COSTS.
➜

arming

You can arm the system by pressing
for one second. When the system arms, you will hear a short siren
sound, or chirp, and see the parking lights flash once. If the
power door locks are controlled by the system, the doors will also
lock. While the system is armed, the LED status indicator will
flash approximately once per second, indicating that the system
© 2001 directed electronics, inc.
IN PROPERTY
DISCONNECT THE
DAMAGE OR
INSTALLED
on your transmitter
7