Arming Diagnostics; Disarming Diagnostics - Directed Electronics Matrix RS 2 Owner's Manual

also record and report any triggers that occurred during your
absence.
➜

arming diagnostics

If the security system is armed at the same time that an input is
active (such as a door opening or sensor triggering), you will hear
one siren chirp to indicate arming and a second siren chirp to
indicate Bypass Notification. A Bypass Notification chirp means
that the security system ignores the input that was active when
the system was armed, until that input ceases. Three seconds
after that input ceases, the security system will resume normal
monitoring. For example, if your vehicle has an interior light exit
delay and you arm your security system before the interior light
turns off, you may hear a second Bypass Notification chirp.
Once the light turns off, however, the security system resumes
normal monitoring.
note: Bypass Notification does not occur when the system
is in Remote Controlled Chirp Muting mode or if the
notification chirps have been programmed by the installer
not to sound.
➜

disarming diagnostics

Extra chirps that are heard when disarming the system are the
Tamper Alert. If four chirps are heard when disarming the
system, then the security system was triggered in your absence. If
five chirps are heard when disarming the system, a zone was trig-
gered so many times that the False Alarm Control Technology
22 © 2001 directed electronics, inc.