Arming While Driving - Directed Electronics Matrix 1 Owner's Manual

➤ ➤ Pressing the arm button a fourth time within five seconds:
The siren chirps four times followed by a long chirp. Zones
Two and Four are now bypassed.
➤ ➤ Pressing the arm button a fifth time within five seconds: The
siren chirps five times followed by a long chirp. All input
zones, except the ignition, are now bypassed.
note: Multi-Level Security Arming only applies to a sin-
gle arming cycle. Once the system is disarmed and then
re-armed, all the zones will be active again.
➜

arming while driving

Your system can be armed while driving the vehicle. Simply press
on your transmitter for two seconds while the vehicle is
running or while the ignition is on. The siren will chirp once and
then once more to indicate that the ignition is on. The security
system will not respond to any input except the door triggers and the
Faultproof Starter Kill (if installed) will not be activated. The secu-
rity system will disarm automatically whenever the ignition is turned
off or the remote's arm/disarm button is pressed. The siren will chirp
twice and the LED will stop flashing.
note: If programmed for the optional Vehicle Recovery
System (VRS
arm the VRS
8
) feature, arming with the transmitter will
®
feature. (See VRS
®
© 2005 directed electronics—all rights reser ved
section of this guide.)
®