Remote Controlled Chirp Muting; Panic Mode; Valet Mode - Directed Electronics Matrix 1 Owner's Manual

➜

remote controlled chirp muting

To temporarily turn off the arm or disarm chirps, use Remote
Controlled Chirp Muting. Simply press
mitter briefly before arming or disarming, and the confirmation
chirp(s) will be eliminated for that one operation only. If you
want the arm/disarm chirps turned off permanently, your dealer
can do this for you.
note: The Warning Zone response to lighter impacts is
bypassed if the system is armed using Remote Controlled
Chirp Muting. This ensures that no chirps will be emit-
ted by the siren in an area you want chirp-free. The sys-
tem is still fully capable of triggering. Only the Warning
Zone response is bypassed.
➜

panic mode

If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transmitter. Just
press
The siren will sound and the parking lights will flash for the
programmed siren duration. To stop Panic Mode at any time,
press
➜

valet mode

You can prevent your security system from automatically arming
and triggering by using Valet Mode. This is very useful when
washing the vehicle or having it serviced. In Valet Mode, the
security system will not arm, even with the remote transmitter,
© 2005 directed electronics—all rights reser ved
for two seconds, and you will enter Panic Mode.
on the remote transmitter again.
on the trans-
11