False Alarm Control Technology (Fact) - Directed Electronics Matrix 1 Owner's Manual

but all convenience functions (door locks, trunk release, etc.)
will continue to work normally.
To enter or exit Valet Mode:
The status LED will light solidly if you are entering Valet Mode,
and it will go out if you are exiting Valet Mode.
To enter or exit Valet Mode using the transmitter:
1. Open any vehicle door.
2. Press
3. Press
4. Press
The status LED will light solidly if you are entering Valet Mode,
and it will go out if you are exiting Valet Mode.
➜

false alarm control technology (FACT)

Your system offers FACT, a feature that prevents annoying
repetitive trigger sequences due to a faulty sensor or environmen-
tal conditions such as thunder, jackhammers, airport noise, etc.
Here's how it works: The alarm triggers three times. Each time,
the same sensor is triggering the alarm. The three triggers are
within 60 minutes of each other. FACT will interpret this
pattern of triggers as false alarms. After the third trigger, FACT
12
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
switch within 10 seconds.
.
.
again.
© 2005 directed electronics—all rights reser ved
DRW-35