Fi Nal Wir Ing Con Nec Tions; Smart Powe Rup 2; De Layed Cour Tesy Lights; Re Mote Con Trol Button As Sign Ments - Clifford Cyber 4 Installation Manual

Mobile security / convenience system
Hide thumbs Also See for Cyber 4:
Table of Contents

Advertisement

1. Connect the RED wire to the 5A fuseholder as shown on page 4.
2. Connect the RED/WHITE wire to the 20A fuseholder as shown on page 4.
3. Attach the two fuseholders to the battery positive cable clamp.
4. Attach the BLACK wire to the vehicle battery negative cable clamp.
NOTE: Power and test ac ces so ries af ter the ba sic sys tem has been tested.
In di vidu ally fuse all ac ces sory power con nec tions. In di vidu ally fuse all +12V
con nec tions.
SmartPowerUp 2 ensures that the system powers up in the same state (disarmed, armed or valet
mode) it was last in. When you first power up the system, it will silently enter its disarmed state.
Some vehicles have a courtesy light delay or dimming circuit, which interferes with an alarm being
able to detect the door trigger upon remote arming. If the delay or dimming lasts more than 5
seconds, no special connections or testing are needed, simply turn on the Delayed Courtesy Lights
feature as noted in the Installer-Programmable Features section on page 16. Please note that
since this feature sets the system to arm the instant the courtesy lights are off, the Door Ajar
Warning feature will not be available.

Re mote Con trol Button As sign ments

The Cyber 4 comes with two ergonomically designed remote controls. Up to two additional
Clifford ACG 2 remote controls can be added (older Clifford ACG and non-ACG remotes
are not compatible with the Cyber 4). For instructions on how to use the remote controls,
please refer to the Cyber 4 User's Manual.

Fi nal Wir ing Con nec tions

Smart Powe rUp™ 2

De layed Cour tesy Lights

Func tion
Arm/Disarm
Activate Auxiliary A*
(usually remote trunk release)*
Silent Arm/Disarm
IntelliStart 4 Accessory*
Activate Auxiliary B*
(usually timed headlight activation)
SmartWindows 4 Accessory*
Unassigned*
Unassigned*
Remote Valet Mode Enter/Exit*
LowTemp/LowBattery AutoStart or
Manual Transmission SafeStart*
*These chan nels can be as signed to con trol other Clif ford ACG 2 sys tems
12
Press but ton(s)
+
+
+
+
+
+
and ac ces so ries on the cus tomer's other ve hi cles.

Advertisement

Table of Contents
loading

Table of Contents