Display Brightness - Miele KFN 37432 iD Operating And Installation Instructions

Selecting further settings
 Touch the  or sensor now to
select:
0: keypad tone off; door alarm off
1: keypad tone off; door alarm on
(after 4 minutes)
2: keypad tone off; door alarm on
(after 2 minutes)
3: keypad tone on; door alarm on
(after 2 minutes).
 Touch the OK sensor to confirm the
selection.
The selected setting is applied, the
 symbol flashes.
 Touch the settings sensor to exit
settings mode.
Otherwise, the appliance electronics
will exit the settings mode
automatically after approximately one
minute.
38
Display brightness 
The display brightness can be adjusted
to suit lighting conditions in the room.
The display brightness can be adjusted
in steps from 1 to 3. The factory default
setting is 3 (maximum brightness).
Altering the display brightness
 Touch the settings sensor.
All symbols available for selection will
appear in the display and the 
symbol flashes.
 Touch the sensors for setting the
temperature ( or ) repeatedly until
the  symbol flashes.
 Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the  symbol lights up in the display.