Undo screws completely.
Fit bracket on the opposite side
and loosely fit screws .
Remove screws completely and
loosely screw them in on the opposite
side.
If you have put locking pins into the
hinges to stop the door opening too
far:
remove the locking pins from the top
of the hinges.
Carry out the following steps on both
doors.
To remove the soft-close mechanism
Warning. The soft-close
mechanism snaps shut when
dismantled.
Danger of injury.
Place the door with the outer side
downwards on a stable surface.
Remove the soft-close mechanism
from the ball joint.
Unscrew holder and remove the
soft-close mechanism .
Installation
85