Miele KFN 37432 iD Operating And Installation Instructions page 69

Problem
The LED lighting is not
working on any of the
shelves.
Cause and remedy
Liquid has been spilt onto the LED lighting on one of
the shelves or the metal discs (contacts) in the left-
hand shelf supports.
The safety switch-off mechanism has switched off the
LED lighting on all the shelves.
 Wipe the stainless steel trim with LED lighting with
a damp cloth and dry it or leave it outside the
appliance to dry. Clean the metal discs (contacts)
in the shelf supports in the same way.
 Make sure that the contacts are clean and dry
before replacing the shelves with LED lighting.
 Push the shelf in until it clicks into position.
 Close the appliance door.
The interior lighting will come on when the door is
opened again.
If this is not the case, then there is a fault.
 Call Miele.
Problem solving guide
69