Table of Contents
Advertisement
System Description
Introduction
The Enforcer is a wireless alarm system that has been designed with your security in mind; with quick
and easy installation and minimal maintenance, the Enforcer protects your home with a multitude of
unique features.
Taking full advantage of Pyronix' innovative two-way wireless technology, the wireless devices on the
Enforcer are constantly communicating with each other, using the Pyronix High Security Wireless
Encryption Protocol.
The Enforcer two-way wireless devices are fully operational when the system is armed. This makes
your system more secure, compared to other wireless systems where devices are disabled for up to
five minutes after every activation to save battery - therefore compromising your security.
The Enforcer has been engineered by Pyronix as a secure, reliable and easy to use wireless alarm
system.
Battery Monitoring/Saving
Advanced technology preserves the battery life of each wireless device. The Enforcer panel also
informs you in advance of when a battery needs replacing, giving you enough time to change the
battery in the specific device before it stops working. This key feature keeps your environment fully
protected, unlike other conventional systems.
High Security Encryption
128 bit high security wireless encryption protocol and intelligent wireless jamming detection.
User Friendly Keyfobs
The two-way wireless keyfob allows you to see the status of your Enforcer via three colour LEDs:
•
System armed: A RED LED will illuminate.
•
System disarmed: A GREEN LED will illuminate.
•
System fault: An AMBER LED will illuminate (this will flash when the keyfob is unable to arm the
system).
•
Alarm activated: A flashing RED LED.
It is possible to allocate different functions to each keyfob, such as: arming or disarming different
areas, activating outputs to control external devices (such as: gates), requesting the system status
and activating PA (panic alarms).
Up to 32 wireless keyfobs can be added to your Enforcer. Each wireless keyfob has a unique ID,
which can be reported to the ARC and HomeControl+ App. These are stored in the event log of the
Enforcer individually.
User Automation Outputs
The Enforcer gives you the option to operate devices (such as: gates, lights, sprinklers.) via your
keypad or remotely via your keyfob or HomeControl+ App.
HomeControl+ App and SMS notifications
Your Enforcer will provide you with real-time push notifications on your smart device or within the
HomeControl+ App, such as: that your child has returned home from school, or a leakage of water in
Enforcer User Guide
102017855 - V01
5
Advertisement
Table of Contents
