Table of Contents
Advertisement
Steps
1. Place the heat sink on the system board and align the screw holes on the heat sink with the screw holes on the system
board.
2. In sequential order (as indicated on the heat sink), tighten the seven captive screws that secure the heat sink to the system
board.
Next steps
1. Install the
CPU
fan.
2. Install the
GPU
fan.
3. Install the battery.
4. Install the
base
cover.
5. Follow the procedure in
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
NOTE:
Removing the coin-cell battery resets the BIOS setup program's settings to default. It is recommended that you
note the BIOS setup program's settings before removing the coin-cell battery.
About this task
The figure indicates the location of the coin-cell battery and provides a visual representation of the removal procedure.
38
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
