Steps
1. Using the alignment post, place the power button with optional fingerprint reader on the palm-rest and keyboard assembly.
2. Replace the two screws (M1.2x2) to secure the power button with optional fingerprint reader to the palm-rest and keyboard
assembly.
Next steps
1. Install the
I/O
board.
2. Install the
GPU
fan.
3. Install the
WLAN
card.
4. Install the battery.
5. Install the
base
cover.
6. Follow the procedure in
Power-adapter port
Removing the power-adapter port
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
About this task
The figure indicates the location of the power-adapter port and provides a visual representation of the removal procedure.
44
Removing and installing components
After working inside your
Before working inside your
computer.
computer.