About this task
The figure indicates the location of the keyboard bracket and provides a visual representation of the installation procedure.
Steps
1. Align the screw holes on the keyboard bracket with the screw holes on the keyboard and palm-rest assembly.
2. Replace the 39 screws (M1.2x2) that secure the keyboard bracket to the keyboard and palm-rest assembly.
Next steps
1. Install the
system
board.
2. Install the
power-adapter
3. Install the
power button with fingerprint
4. Install the
I/O
board.
5. Install the
display
assembly.
6. Install the
CPU
fan.
7. Install the
GPU
fan.
8. Install the
WLAN
card.
9. Install the battery.
10. Install the
base
cover.
11. Follow the procedure in
Keyboard
Removing the keyboard
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
WLAN
card.
5. Remove the
GPU
fan.
port.
reader.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
61