2. Install the
base
cover.
3. Follow the procedure in
Removing the M.2 2280 PCIe solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Disconnect the
battery
About this task
The figure indicates the location of the M.2 2280 PCIe solid-state drive and provides a visual representation of the removal
procedure.
Steps
1. Remove the screw (M2x4) that secures the solid-state drive to the system board.
2. Slide and remove the solid-state drive module from the solid-state drive slot on the system board.
Installing the M.2 2280 PCIe solid-state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the M.2 2280 PCIe solid-state drive and provides a visual representation of the installation
procedure:
After working inside your
Before working inside your
cable.
computer.
computer.
Removing and installing components
27