Table of Contents
Advertisement
Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #1
● Flat-head screwdriver
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Secured to
Base cover
Palm-rest and keyboard
assembly
6-Cell battery
Palm-rest and keyboard
assembly
3-Cell battery
Palm-rest and keyboard
assembly
Display hinges
Palm-rest and keyboard
assembly
Display assembly
Palm-rest and keyboard
assembly
I/O board
Palm-rest and keyboard
assembly
CPU fan
Palm-rest and keyboard
assembly
Power-adapter port
Palm-rest and keyboard
assembly
Power button and
Palm-rest and keyboard
optional fingerprint
assembly
reader
10
Removing and installing components
Screw type
Quantity
M2x5
5
M2x4
7
M2x4
4
M2.5x5
6
M2x4
6
M2x3
3
M2x4
2
M1.2x2
1
M1.6x2
2
2
Screw image
Advertisement
Table of Contents
