ADJ ENCORE BURST UV IP User Instructions page 19

Encore Burst UV IP
TOTAL LED TIME
• LED On Time - The TOTAL LED ON time is displayed. This total LED ON time CANNOT be reset.
NOTE: The displayed time represents the TOTAL LED ON time.
• LED On Time-R - The CURRENT LED ON running time is displayed. This running time may not
be the same as the total LED ON time displayed under "LED On Time". This total LED ON time
CAN be reset. NOTE: The displayed time represents the current LED ON time since the last
reset.
• LED On Time Reset - With this function you can reset the CURRENT LED ON time that is displayed
under "LED On Time-R".
FIXTURE TEMPS
• Current - The current unit temperature is displayed.
• Max Resettable - Maximum temperature that has been recorded, before reset and after reset.
This temperature may not be the same as the temperature displayed under "CURRENT" or "MAX NOT
RESETTABLE". This temperature CAN be reset.
NOTE: The displayed temperature represents the highest temperature the fixture has reached
since the last reset.
• Max Not Resettable - Overall maximum temperature that has been recorded. This temperature
CANNOT be reset, and could continue rise.
• Rst Temp History - Reset the "Max Resettable" temperature.
DMX VALUES - Displays the DMX values of any DMX channel that is currently in use. NOTE: DMX
value options depend on the current DMX channel mode setting.
SOFTWARE VERSION - The current software version is displayed.
ADJ Products, LLC - www.adj.com - Encore Burst UV IP User Manual Page 18
System Menu