Advertisement
Please follow below chapter for installation operations
2.4. PCI/PCIE
Turn off PC/notebook and remove power cord from AC plug/sockets on the wall.
Remove notebook battery.
After make sure the system is fully shut down, open the chassis.
Unpack the device package and make sure don't touch any electrical and
semiconductor components on the device, especially ICs on board.
Install PCI/PCIE card to available motherboard PCI/PCIE slot and fasten the screw on the
device and back plate.
Close the chassis and connect signal source to the device.
Turn on the system.
Wrist strap
6
6/7
Advertisement
