Advertisement
2.4. MiniCard/MiniPCI
Turn off PC/notebook and remove power cord from AC plug/sockets on the wall.
Remove notebook battery.
After make sure the system is fully shut down, open the chassis.
Unpack the device package and make sure don't touch any electrical and
semiconductor components on the device, especially ICs on board.
For MiniCard/MiniPCI, please make sure the installation direction and the connectors on the
device are connected.
Install MiniCard/MiniPCI card to available motherboard MiniCard/MiniPCI slot and fasten
the screw on the device and back plate.
Close the chassis and connect signal source to the device.
Turn on the system.
MiniCard
MiniPCI
6
6/7
Advertisement
