Problem
The water comes out of
the cavity embossment.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
13. ENERGY EFFICIENCY
13.1 Product Fiche and information according to EU 65-66/2014
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, con‐
ventional mode
Energy consumption with a standard load, fan-
forced mode
Number of cavities
Heat source
Volume
Type of oven
Possible cause
There is too much water in
the cavity embossment.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
Remedy
Deactivate the oven and
make sure that the appli‐
ance is cold. Wipe the wa‐
ter with a cloth or sponge.
Add the correct amount of
water to the cavity em‐
bossment. Refer to the
specific procedure.
Electrolux
EOA5555AAX
EOA45555OX
95.3
A
0.99 kWh/cycle
0.81 kWh/cycle
1
Electricity
71 l
Built-In Oven
ENGLISH
35