Attaching The Propeller - Watersnake Shadow MK II SWNG 44/48 Owner's Manual

ATTACHING THE PROPELLER

Before doing anything with the propeller, ensure the cables to
the battery are disconnected.
1: Place shear pin in shaft as shown.
2: Align the propeller against the shear pin on the shaft
(there is a groove on the back of the propeller which the
shear pin needs to slot into)
and then tighten the propeller nut securely.
Propeller
Nut
2
8
1
Propeller Shaft
Propeller
Shear Pin
Watersnake