Remote Control Fob - Watersnake Shadow MK II SWNG 44/48 Owner's Manual

SHADOW MK II
STOWING
When your Watersnake motor is not in use always stow and store it properly.
Press the quick locking and release lever and raise the motor, pulling towards
the stern of your boat until it is secure on the locking cradles and locked into
the horizontal (stowed) position. A fi nal pull on the shaft of the motor may be
necessary to ensure it has locked into place on the cradle.
(refer to diagram on page 4)
ENSURE YOUR MOTOR IS PROPERLY STOWED AND SECURED
BEFORE DRIVING AND OR MOVING YOUR BOAT TO AVOID
DAMAGE.
PLEASE NOTE:
Watersnake Distribution Pty Ltd accepts no liability for injury or damage
caused by the incorrect deployment or stowing of this motor.

REMOTE CONTROL FOB

(1) Steer Left
(2) Steer Right
(3) Momentary button
(4) On / Off button
(5) + and - Increase / Decrease speed
(6) This button has no function
Plese note:
This remote control fob is only
compatable with Watersnake MK II
NGRC 54/54 model. This unit will not
work with other Watersnake Shadow
MKII Motors.
www.watersnake.com.au
5
1
3
4
2
6
11