Attaching The Propeller - Watersnake SLITHER SL Owner's Manual

ATTACHING THE PROPELLER

Before doing anything with the propeller, ensure the cables to
the battery are disconnected.
1: Place shear pin in shaft as shown.
2: Align the propeller against the shear pin on the shaft
(there is a groove on the back of the propeller which the shear
pin needs to slot into) and then tighten the propeller nut securely.
Propeller
nut
2
Please note the Slither SLW34/30 motor comes with a 2 bladed propeller.
6
1
Propeller shaft
Propeller
Shear pin
Watersnake