Foot Pedal Control System - Watersnake Shadow MK II SWNG 44/48 Owner's Manual

SHADOW MK II

FOOT PEDAL CONTROL SYSTEM

The low profile foot pedal control is used to adjust direction and speed. A
variable speed dial control is located at the right side of the foot control box.
(1) Steering is enabled via the buttons marked left and right.
Pushing down on the button marked "L" at the top left hand corner of the
pedal with your foot will turn the motor to the left
(2) To steer to the right push your foot down on the button marked "R" at the
top right hand corner of the pedal.
(3) Use your heel at the bottom of the pedal to pause or resume thrust power
(4) A constant on/off switch is set at the left hand side of the foot pedal control box.
To set the power of the motor to off the constant on/off switch should be in the
backwards position with the tail end pointing down towards you.
To set the power of the motor to on, the constant on/off switch should be moved
to the forward position with the tail end pointing up.
(5) Variable speed control dial.
1
4
www.watersnake.com.au
2
3
5
13