Table of Contents
Advertisement
Section - Configuration
• Go to Call Server > Routes.
• Click on the
icon for RestrictedRouteGrp and add the following route.
• Route from PSTN and INET gateway users to local users of DVX2.
• Configure user extensions – Add user extensions 200 to 224 to DVX2 and add them to the 'LocalRouteGroup'.
Please note that the first digit of all the extensions are '2', this is done so that all of them will match a single
route from DVX1 to DVX2.
• Add DVX gateway – Add the DVX gateway as shown below and assign it to the 'LocalRouteGroup'. The 'SIP
user ID', 'Username' and 'Password' used in the Registration parameters should be the one used when the DVX
gateway was added to DVX1.
D-Link DVX-1000 User Manual
Configuring DVX2
Advertisement
Table of Contents
