Command Line Interface - D-Link DVX-1000 User Manual

Section  - Command Line Interface
This section describes the DVX-1000 system configuration through the command line interface. To access the command
line interface, connect the console port of DVX-1000 to the 'com' port of your PC, using the supplied console cable. The
terminal settings should be (15200 8-N-1). When the user connects to the DVX-1000 using the serial port, he will be
prompted for login name & password. The user must be an administrator to log on to DVX-1000 and execute any CLI
commands. Once the user name and password verification succeeds, the DVX command prompt will now appear and
the user can now configure the system with the aid of the CLI commands described below.
Warning: Please make sure that the device is powered down before you connect the console port to avoid damage
to the interface.
The CLI commands are structured in tree-style architecture. All the CLI commands are case insensitive & at any time
the user can enter '?" to display what all commands are available at this level or depth.
Help Command:
Command Name:
Command description:
Command Format:
History Command:
Command Name:
Command description:
Command Format:
Set IP Command:
Command Name:
Command description:
Command Format:
Example:
D-Link DVX-1000 User Manual

Command Line Interface

help
The 'help' command displays all the available commands to the console.
help
history
The 'history' command displays the list of previously executed commands in the
current session to the user.
history
set ip
The 'set ip' command is used for setting the IP address statically.
set ip <ipaddress> <netmask (optional)>
set ip 192.168.10.89 255.255.255.0
0