Provisioning - D-Link DVX-1000 User Manual

Section  - Configuration

Provisioning

The provisioning server is used to configure compatible devices to interoperate with DVX. The Administrator needs to
add the MAC address of the device which is to be provisioned. This is used for initial authentication and to send the SIP
credentials to the device. Addition of a new device or deletion of an existing one can be done through Provisioning >
DeviceList page of DVX web interface. User has to provide the MAC address of the device and the SIP users that are
to be used with the device.
These SIP users should have been created earlier through CallServer > Users > Add Users page. Provisioning
server supplies an Authentication key (a 48 hex bytes) to the device on the first communication. This authentication key
along with the SIP credentials and MAC address can be seen on the Provision > DeviceList > view ports page for
each device. The authentication key can be cleared by clicking the Clear Key button. The SIP user list can be edited
by clicking the edit button.
The configuration file that has to be sent out each of these devices has to be uploaded to DVX through the web interface.
These files are identified by Vendor ID and Model No. The administrator has the option to add a new configuration file
or delete a configuration file from the Provisioning > Configuration file page.
D-Link DVX-1000 User Manual 0