Activating And Deactivating Features - D-Link DVX-1000 User Manual

Section  - Configuration

Activating and Deactivating Features

Feature activation can either be done from the web interface or from a phone. However, activation of sending voicemails
through email can be done only through the web and for certain features where additional data is essential (for instance,
a call forwarding number for call forward, or a time interval for follow me – call forwarding and so on), the additional data
has to be entered through the web interface. Once this information is available the feature can be activated/deactivated
from either the web or the phone interface. Activating these features from the phone without entering the required
additional data for them beforehand will create unpredictable scenarios.
Activating and Deactivating Features from the Web Interface
Features can be activated or deactivated from the web interface by clicking on the Call Server > Users link and then
clicking on the feature column for the user whose features are to be modified. When logged in the user mode, this link
is accessed as feature setting from the home page.
Activating and Deactivating Features from the Phone
Feature activation/deactivation can also be done from the phone by dialing a sequence of digits in the format 'FCCAPPPP'.
Here F is the single digit feature prefix configured (default is *) CC is the 2 digit feature code for the feature, A is the
activation/de-activation state for the feature (1 for activation or 0 for deactivation) and PPPP is the four digit feature
password.
For example, if * is the feature prefix, 14 is the feature code for 'Do Not Disturb – Forward to Voicemail' and 1234 is the
password, user could dial *1141234 to activate 'Do Not Disturb – Forward to Voicemail' feature.
D-Link DVX-1000 User Manual