Table of Contents
Advertisement
Section - Installation
This section will walk you through the installation process.
To set the IP address through WEB, open the web browser and type in the default ip address of the board. The initial
login page will appear. You will have to log in as administrator to set the system parameters. The default administrator
user name and password is 'ippbx' and 'ippbx'.
1. Connect the supplied power adapter to the DVX-1000 and power up.
2. Connect the LAN port to your network (hub, switch, or router) using an Ethernet cable.
3. The power indicator and LAN indicator should be ON, if the corresponding LAN Port is connected to a
Local Network.
4. DVX-1000 comes with the default IP address of 10.0.0.1. You can change the ip address through CLI
(Command Line Interface) or web interface.
D-Link DVX-1000 User Manual
Installation
Getting Started
10
Advertisement
Table of Contents
