Table of Contents
Advertisement
Q
This section takes you through a step-by-step minimum installa-
tion and setup procedure for the internet server. Please refer to
the main text of this manual for detailed information about the
setup and operation of this device.
Getting Started
Step 1:
Unpack the device. Make certain no components have
been lost or damaged. A packing list is provided on page
7.
Step 2:
Choose an installation site on a flat, level surface or
wall. Make sure it is placed near the modem or ISDN/TA
you plan to use for your internet connections.
Making Connections
Step 3:
If you have an existing LAN, connect the internet server
to your LAN using a Category 3, 4 or 5, twisted-pair cable
and the device's 10x Uplink port. This connection should
be made to a 10BASE-T Ethernet switch or hub.
If you are using the built-in 10 port hub on the internet
server to creat a LAN, simply plug each of your computers
into one of the LAN ports.
Step 4:
Connect the internet server to a modem or ISDN/TA,
using one or both of the device's serial ports (COM1 and
COM2) located on the side panel. (Note that your modem
Quick Installation
UICK
I
NSTALLATION
Internet Server User's Guide
xi
Advertisement
Table of Contents
