Dip Switch Settings; Operation - Timeguard TRT032N Operating Instructions Manual

7. DIP Switch Settings

• The temperature swing can be adjusted between 0.5°C and 1.0°C by selecting
the desired DIP switch position found on the rear of the unit. We suggest using
0.5°C position unless the boiler turns ON and OFF too rapidly.
• The PID 'Proportional-Integral-Derivative' can also be selected ON or OFF
using the DIP switches on the rear of the unit. We suggest setting this to
the ON position. As the room temperature approaches the set temperature,
the thermostat will intermittently turn the heating ON and OFF, to help
prevent temperature over-shoot.
• The boiler type can be set to either 3CYC (Gas) or 6CYC (Oil),
using the DIP switches on the rear of the unit.

8.Operation

• Restore mains to the unit after making sure to check all system wiring
is complete, and after you have selected the desired DIP switch settings.
• Use the dial adjuster to set the desired temperature.
6
• When the room temperature is below the desired value, the thermostat
will call for heat from the boiler.
• Once the room has reached the desired temperature, the TRT032N
ceases to call for heat from the boiler.