Page 1
Those who use this information must also have been trained about the radio remote control and its risks by Autec's personnell or by people authorized by Autec. Autec cannot be held liable for responsibilities resulting from the modification of these functionalities after the product sale.
Page 3
Contact Autec if any of the instructions and/or warnings provided in this manual are not clear. No part of this manual may be reproduced, in any form or by any means, without written permission of Autec (including re- cording and photocopying).
Page 4
- the green LED in the transmitting unit blinks slowly, indicating that the radio remote control is ready to control the ma- chine - the ENABLE LED in the receiving unit blinks, indicating that the radio link is built. AUTEC - Air Series LIIMSC0AE0-03.fm A8 - Configuration Menu...
Page 5
START pressed until the code repeatedly until LED 1 FUNCTION, START and S2 green LED illuminates blinks pressed until the green LED built. is steady on to save this setting LIIMSC0AE0-03.fm AUTEC - Air Series A8 - Configuration Menu...
Page 6
Autec cannot be held responsible if the radio remote control is set with forbidden frequencies. Programming related to “Working frequency” is as follows: - BANK GROUP.
Page 7
WORKING FREQUENCY FREQUENCY BAND AIR series radio remote controls can work at two different frequency bands: - 433.050 - 434.790 MHz - 915.000 - 928.000 MHz. The frequency band is selected by DIP 1 under the transmitting unit's battery and DIP 1 on the receiving unit's mother board.
Page 8
FUNCTION, START and S2 pressed until the green LED 2 and LED 3 illumi- confirm set- desired option pressed until the green LED is LED illuminates nate ting steady on to save this setting AUTEC - Air Series LIIWFR1AE0-03.fm A8 - Configuration Menu...
Page 9
2. Set DIP 1 to OFF (FREQUENCY BAND). 3. Set MANUAL (RADIO MODE). 4. Set BANK GR. = 2 (BANK GROUP). 5. Set CH. BANK = 3 and LOGICAL CH. = 1 (CHANNEL BANK). LIIWFR1AE0-03.fm AUTEC - Air Series A8 - Configuration Menu...