Wan Interface Settings - Using Bigpond; Traffic Shaping - D-Link DFL-1100 User Manual

Network security firewall

Hide thumbs Also See for DFL-1100:

Table of Contents

WAN Interface Settings – Using BigPond

The ISP Telstra BigPond uses BigPond for authentication; the IP is assigned with DHCP.

Username – The login or username supplied to you by your ISP.

Password –

When Traffic Shaping is enabled, and the correct maximum up and downstream bandwidth

is specified, it's possible to control which policies have the highest priority when large

amounts of data are moving through the N

the web server might be given higher priority than the policies for most employees' computers.

You can use traffic shaping to guarantee the amount of bandwidth available through the

firewall for a policy; this will ensure that there is enough bandwidth available for a high-priority

service. You can also use traffic shaping to limit the amount of bandwidth available through

the firewall for a policy; in this way, you can keep less important services from using

bandwidth needed for more important services.

Note: If the limit is set too high, i.e. higher then your Internet connection, the traffic shaping

will not work at all.

The password supplied to you by your ISP.

EFEND

DFL-1100. For example, the policy for

Table of Contents

Netdefend dfl-1100