Add Ping Access To An Interface; Add Admin Access To An Interface - D-Link DFL-1100 User Manual

SNMP – Specifies if SNMP should be allowed or not on the interface, the DFL-1100
supports read-only access.

Add ping access to an interface

Follow these steps to add ping access to an interface.
Step 1. Click on the interface to which you would like to add ping access.
Step 2. Enable the Ping checkbox.
Step 3. Specify what networks are allowed to ping the interface, for example
192.168.1.0/24 for a whole network or 172.16.0.1 – 172.16.0.10 for a range.
Click Apply to apply the setting, or click Cancel to discard the changes.
Example:

Add Admin access to an interface

To add admin access to an interface, click on that interface. Only users with administrator
rights can login on interfaces where admin access only is enabled.
Follow these steps to add admin access to an interface.
Step 1. Click on the interface to which you would like to add admin access.
Step 2. Enable the Admin checkbox.
Step 3. Specify what networks are allowed to access the interface, for example
192.168.1.0/24 for a whole network or 172.16.0.1 – 172.16.0.10 for a range.
Step 4. Specify the protocol used to access the DFL-1100 from the dropdown menu,
either HTTP and HTTPS (Secure HTTP) or only HTTPS.
Click Apply to apply the setting or click Cancel to discard the changes.
Example:
12