Wan Interface Settings - Using Bigpond; Traffic Shaping - D-Link DFL-1100 User Manual

WAN Interface Settings – Using BigPond
The ISP Telstra BigPond uses
BigPond for authentication; the IP is
assigned with DHCP.
•
Username – The login
or username supplied to
you by your ISP.
•
Password
password
you by your ISP.

Traffic Shaping

When Traffic Shaping is enabled and the correct maximum up and downstream
bandwidth is specified it's possible to control whichever policies have the highest priority when
large amounts of data are moving through the DFL-1100. For example, the policy for the web
server might be given higher priority than the policies for most employees' computers.
You can use traffic shaping to guarantee the amount of bandwidth available through the
firewall for a policy. Guarantee bandwidth to make sure that there is enough bandwidth
available for a high-priority service. You can also use traffic shaping to limit the amount of
bandwidth available through the firewall for a policy. Limit bandwidth to keep less important
services from using bandwidth needed for more important services.
Note: If the limit is set too high, i.e. higher then your Internet connection, the traffic
shaping will not work at all.
– The
supplied to
20