Status; System - D-Link DFL-1100 User Manual

Status

In this section, the DFL-1100 displays the status information about the Firewall.
The Administrator may use Status to check the System Status, Interface statistics, VPN,
connections and DHCP Servers.

System

Click on Status in the menu bar, and then click System below it. A window will appear
providing
information about
the DFL-1100.
Uptime – The time
the firewall has
been running,
since the last
reboot or start.
CPU Load –
Percentage of
CPU used.
Connections
Number of current
connections
through the firewall.
Firmware
version – The
firmware version
running on the
firewall.
Last restart – The
reason for the last
restart.
IDS Signatures –
The IDS signature
versions.
There are also two
graphs on this
page, one showing the CPU usage during the last 24 hours. The other one is showing the
state table usage during the last 24 hours.
–
72