Enable Logging; Enable Audit Logging; Enable E-Mail Alerting For Isd/Idp Events - D-Link DFL-1100 User Manual

configured to generate log entries. It's also possible to have E-mail alerting for IDS/IDP events
to up to three email addresses.

Enable Logging

Follow these steps to enable logging.
Step 1. Enable syslog by checking the Syslog box.
Step 2. Fill in your first syslog server as Syslog server 1, if you have two syslog servers
you have to fill in the second one as Syslog server 2. You must fill in at least one syslog
server for logging to work.
Step 3. Specify what facility to use by selecting the appropriate syslog facility. Local0 is
the default facility.
Click Apply to apply the setting, or click Cancel to discard the changes.

Enable Audit Logging

To start auditing all traffic through the firewall, follow the steps below and the firewall will start
logging all traffic through the firewall. This is needed for running third party log analyzers on
the logs, and to see how much traffic different connections use.
Follow these steps to enable auditing.
Step 1. Enable syslog by checking the Enable audit logging box.
Click Apply to apply the setting, or click Cancel to discard the changes.
Enable E-mail alerting for IDS/IDP events
Follow these steps to enable E-mail alerting.
Step 1. Enable E-mail alerting by checking the Enable E-mail alerting for IDS/IDP
events checkbox.
Step 2. Choose the sensitivity level.
Step 3. In the SMTP Server field, fill in the SMTP server to which the DFL-1100 should
send email.
Step 4. Specify up to three valid email addresses to receive the email alerts.
Click Apply to apply the setting, or click Cancel to discard the changes.