Change Administrative User Access Level; Change Administrative User Password - D-Link DFL-1100 User Manual

Change Administrative User Access level

To change the access level of a user, click on the user name and you will see the following
screen. From here you can change the access level by choosing the appropriate level from
the drop-down menu.
Access levels
Administrator – the
user can add, edit and
remove
change all settings.
Read-only – the user
can only look at the
configuration
firewall.
No Admin Access –
Used for authentication purposes.
Follow these steps to change Administrative User Access level.
Step 1. Click on the user you would like to change.
Step 2. Choose the appropriate level from the drop-down menu.
Click Apply to apply the setting, or click Cancel to discard the changes.

Change Administrative User Password

To change the password of a user click on the user name and you will see the following
screen.
Follow these steps to change the
Administrative User password.
Step 1. Click on the user.
Step 2. Enable
password checkbox.
Step 3. Enter the new password twice.
Click Apply to apply the setting, or
click Cancel to discard the changes.
Note: The password should be at least six characters long. The password can contain
numbers (0-9) and upper and lower case letters (A-Z, a-z). Special characters and spaces
are not allowed.
rules and
of the
the Change