Enable User Authentication Via Http / Https; Enable Radius Support - D-Link DFL-1100 User Manual

Enable User Authentication via HTTP / HTTPS

Follow these steps to enable User Authentication.
Step 1. Enable the checkbox for User Authentication.
Step 2. Specify if HTTP and HTTPS or only HTTPS should be used for the login.
Step 3. Specify the idle-timeout, the time a user can be idle before being logged out by the
firewall.
Step 4. Choose new ports.
Click Apply to apply the setting, or click Cancel to discard the changes.

Enable RADIUS Support

Follow these steps to enable RADIUS support.
Step 1. Enable the checkbox for RADIUS Support.
Step 2. Fill in up to two RADIUS servers.
Step 3. Specify which mode to use, PAP or CHAP.
Step 3. Specify the shared secret for this connection.
Click Apply to apply the setting, or click Cancel to discard the changes.
44