Advanced Settings - D-Link DFL-1000 Quick Install Manual

2. Advanced settings

Use the following table for the information to customize advanced DFL-1000 settings that can be
configured using the setup wizard.
External DHCP:
Interface:
PPPoE:
If your ISP supplies you with an IP address using PPPoE, record your PPPoE user
name and password. You can configure the external interface for PPPoE using the
setup wizard.
DHCP Server
Settings:
The DFL-1000 contains a DHCP server that you can configure to automatically set
the addresses of the computers on your internal network. You can configure the
DHCP server using the setup wizard.
Use the following table to record the IP address and netmask of the DFL-1000 DMZ interface if you
are configuring it during installation.
IP:
DMZ: _____._____._____._____
If your ISP supplies you with an IP address using DHCP no further
information is required.
User name:
Password:
Starting IP:
Ending IP:
Netmask:
Default Route:
DNS IP:
Netmask:
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____