Wan Interface Settings - Using Pppoe - D-Link DFL-1100 User Manual

WAN Interface Settings – Using PPPoE
Use the following procedure to configure the N
PPPoE (Point-to-Point Protocol over Ethernet). This configuration is required if your ISP uses
PPPoE to assign the IP address of the external interface. Please enter the username and
password provided to you by your ISP.
Username – The login or username supplied to you by your ISP.
Password –The password supplied to you by your ISP.
Service Name – When using PPPoE, some ISPs require you to fill in a Service
Name.
Primary and Secondary DNS Server – The IP addresses of your DNS servers,
these are optional and are often provided by the PPPoE service.
D DFL-1100 external interface to use
ET EFEND
16