Monitoring The Hub Stack - D-Link DFE-2600 Series User Manual

Speed Capability. This field displays the port's current speed set-
ting, Auto for auto-detect/correct, 100M for 100Mbps connections
only, or 10M for 10Mbps connections only. This variable is user
configurable.
DFE-2600 Stackable Hub - Network Monitoring : Port State Menu
Group ID(1-8) [1]
Connector Type: UTP
Port Status
Link Test:
Receive Polarity: Normal
Auto Partition:
Port Speed:
PREV GROUP NEXT GROUP
You can use PREV GROUP and NEXT GROUP to switch to another hub,
or PREV PORT and NEXT PORT to switch to another port. You can
also enter the port's Group ID and Port ID numbers to go directly to a dif-
ferent port.

Monitoring the Hub Stack

The hub supports several monitoring functions, allowing you to keep statis-
tics on the operation of each port, each hub, and the entire network
segment, as well as to monitor the addresses of the packets received at each
port.
Master Hub Setup and Management
Port ID(1-24) [1 ]
Port State
Up Link Test State:
On Admin State:
100M Speed Capability: <Auto
PREV PORT NEXT PORT
<Enable >
<Enable >
>
HELP SAVE EXIT
61