D-Link DFE-2600 Series User Manual page 63

and System Contact. These settings can be retrieved from the hub using
SNMP requests, allowing them to be used for network management pur-
poses. Each of these fields is restricted to 64 characters:
System Name. This parameter corresponds to the MIB-II object
sysName , and is used to assign a name to the hub for administrative
purposes. The hub's domain name is often used, provided a name
has been assigned.
System Location. This parameter corresponds to the MIB-II object
sysLocation, and is used to indicate the physical location of the hub
for administrative purposes.
System Contact. This parameter corresponds to the MIB-II object
sysContact, and is used to note the name and contact information of
the person responsible for administering the hub.
Display Timeout. An additional setting, the console time-out, may be
used to automatically log out the console interface after a predetermined
period of inactivity. This feature increases hub security by preventing
access to the hub after the interface has been inadvertently left logged
on. A setting of 0 disables this feature.
DFE-2600 Stackable Hub - System Configuration Menu
Mgmt Hardware Revision:
Boot PROM Firmware Version: Ver. 2.22
Software Version:
MAC Address:
System Description:
D-Link Corp. DFE-2600 Dual Speed Stackable Hub SNMP/
System Name
System Location
System Contact
Console/Telnet Display Timeout in Minutes
Master Hub Setup and Management
Rev. 01
Ver. 2.04
0080C80D308C
[
[
[
HELP
]
]
]
[60 ]
SAVE EXIT
51