Perkins 1204F-E44TA Operation And Maintenance Manual page 46

46
Operation Section
Selective Catalytic Reduction Warning System
(Table 5, contd)
Inducement Time None
First Occurrence
The system must be fault free for 40 hours before the system will reset to zero. If the fault is intermittent, and returns within the 40 hours, then
the repeat occurrence inducement time will be triggered.
The override can only be used once
Inducement Time None
Repeat Occurrence
Inducement None
Notification None
Contact your Perkins dealer or your Perkins Distributor at level 1 warning, do not let the fault develop.
36 Hours 64 Hours
None 5 Hours
None 75 Percent of torque
Emission malfunction Emission malfunction
lamp will be on solid lamp will flash
SEBU9063-07
50 Percent torque Cycling the keyswitch
Shut down or idle will give 20 minutes
Until fault heals of full power
50 Percent torque Cycling the keyswitch
Shut down or idle will give 20 minutes
Until fault heals
of full power
Emission malfunction Emission malfunction
lamp will flash lamp will flash
The stop lamp will be
on solid