Quick Reference Guide - ElectrIQ CD12PRO-LE User Manual

QUICK REFERENCE GUIDE

POWER
Power Button
Press the power button to turn the dehumidifier on and off.
OSC
Swing control Button
Press once to make the louvre swing and press again
to lock at 45 degrees, press again to lock at 90 degrees. Do not operate the unit if the self-
opening louvers do not open when the unit is powered on.
TIMER
Timer Button: Press the timer button
then use buttons
to adjust the timer (1-24 hrs, start/ stopping timer). In power on mode the set number
will represent the number of hours the unit will run for before turning off. This will remain
unaffected if unit goes in to defrost mode or the tank is emptied than reinserted. In standby
mode the set number represents the period in hours after which the unit will start. To
cancel the timer press the timer button again.
Humidity Buttons: Press the Up or Down
buttons when the unit
is displaying the current relative humidity to select the desired humidity level. The
humidity level can be set between a range of 35% RH (Relative Humidity) to 80% RH in
5% increments. Please note the desired humidity cannot be changed when the unit is in
SMART mode.
SMART Mode: This is designed for maximum convenience as it
maintains the room at an ideal domestic environment humidity
level of 50-55% RH while saving electricity. This is the default
mode and is recommended for most users.
The compressor will work until the desired humidity is reached
and then will stop;
Low Fan Mode: The fan will move the air around the room ensuring the entire air in the
room is processed and the relative humidity correctly measured. This mode gives you
the ability to adjust the desired humidity, while running the fan at a lower speed.
High Fan Mode: The fan will move the air around the room ensuring the entire air in
the room is processed and the relative humidity correctly measured. This mode gives
you the ability to adjust the desired humidity, while running the fan at the high speed.
Allowing more air to pass over the coils than in low fan speed.
Laundry Mode: for the dehumidifier to operate continuously with maximum water
extraction until the tank is full, set the unit to High Fan mode and set the desired
humidity level to 35%-50% RH. 35% is very dry and
09